Venting Device
Venting Device for Electric Vehicle Battery Packs
| Dimensions | Ø108 X 104 X 25.5 X 39 | Weight | 539.1g | Installation Area |
ㆍMaintain flatness within Ø110 X 106 X Ø69, corner R14 (2 places) ㆍSurface roughness less than Ra 3.2 ㆍVent hole Ø69 (1 place) ㆍBolt holes Ø7.1 (6 places), P.C.D Ø95 |
|---|---|---|---|---|---|
| Material |
ㆍHOUSING : Aluminum ㆍCAP : Aluminum ㆍRUPTURE DISC : Stainless steel + Fluoropolymer ㆍGASKET : EPDM |
||||
| Durability Temperature | -40℃ ~ 220℃ | Continuous Operating Temperature | Max. 85℃ | Fastening Type |
ㆍBolt-fastening (M6), 6 places ㆍAssembly from inside the pack |
| Burst Pressure | 0.2 barg +/-25% @ 22℃ | Reliability Test |
ㆍVibration test PASS ㆍSalt spray test PASS ㆍIP Code (IPX7 + IPX6K + IPX9K) test PASS ㆍHigh temperature storage test (85℃, 1000hr) PASS |
||
| Discharge Capacity | 188 L/s @ 0.2 bar, 22℃, air | ||||
| Dimensions | L124 X W58 X H37 | Weight | 165.2g (including fastener) | Installation Area |
ㆍMaintain flatness within 124 X 58mm, corner R6 at 4 locations ㆍSurface roughness less than Ra 3.2 ㆍOne vent hole 90 X 25mm ㆍBolt holes Ø6.2 or M6 X P1.0 Female, 4 locations ㆍPitch 106 X 40mm |
|---|---|---|---|---|---|
| Material |
ㆍHOUSING : Aluminum ㆍRUPTURE DISC : Stainless steel + Fluoropolymer ㆍGASKET : EPDM |
||||
| Durable Temperature | -40℃ ~ 220℃ | Continuous Operating Temperature | Max. 85℃ | Fastening Type |
ㆍBolt-fastening (M6), 4 locations ㆍAssembly from outside of pack |
| Burst Pressure | 0.2 barg +/-25% @ 22℃ | Reliability Test |
ㆍVibration test PASS ㆍSalt spray test PASS ㆍIP Code (IPX7 + IPX6K + IPX9K) test PASS ㆍHigh temperature storage test (85℃, 1000hr) PASS |
||
| Discharge Capacity | 118 L/s @ 0.2 bar, 22℃, air | ||||
| Dimensions | L124 X W58 X H37 | Weight | 165.2g (including fastener) | Installation Area |
ㆍMaintain flatness within 124 X 58mm, corner R6 at 4 locations ㆍSurface roughness less than Ra 3.2 ㆍOne vent hole 90 X 25mm ㆍBolt holes Ø6.2 or M6 X P1.0 Female, 4 locations ㆍPitch 106 X 40mm |
|---|---|---|---|---|---|
| Material |
ㆍHOUSING : Aluminum ㆍRUPTURE DISC : Stainless steel + Fluoropolymer ㆍGASKET : EPDM |
||||
| Durability Temperature | -40℃ ~ 220℃ | Continuous Operating Temperature | Max. 85℃ | Fastening Type |
ㆍBolt-fastening (M6), 4 locations ㆍAssembly from outside of pack |
| Burst Pressure | 0.5 barg +/-25% @ 22℃ | Reliability Test |
ㆍVibration test PASS ㆍSalt spray test PASS ㆍIP Code (IPX7 + IPX6K + IPX9K) test PASS ㆍHigh temperature storage test (85℃, 1000hr) PASS |
||
| Discharge Capacity | 175 L/s @ 0.3 bar, 22℃, air | ||||
| Dimensions | L78.1 X W68.4 X H26.5 | Weight | 37.1g (excluding fastener) | Installation Area |
ㆍMaintain flatness within L86 X W76, corner R8 at 4 locations ㆍOne vent hole Ø57 ㆍThree holes for clinching nut |
|---|---|---|---|---|---|
| Material |
ㆍHOUSING : PA6-GF30 (UL94 V-0) + Al insert ㆍCAP : PA6-GF30 (UL94 V-0) ㆍRUPTURE DISC : Stainless steel + Fluoropolymer ㆍGASKET : Silicone |
||||
| Durability Temperature | -40℃ ~ 130℃ | Continuous Operating Temperature | Max. 85℃ | Fastening Type |
ㆍBolt-fastening (M6), 3 locations ㆍAssembly from outside of pack |
| Burst Pressure | 0.2 barg +/-25% @ 22℃ | Reliability Test |
ㆍVibration test PASS ㆍSalt spray test PASS ㆍIP Code (IPX7 + IPX9K) test PASS |
||
| Discharge Capacity | 51 L/s @ 0.25 bar, 22℃, air (Simulation data) | ||||
| Dimensions | L70 X W70 X H22 | Weight | 112.8g (excluding fastener) | Installation Area |
ㆍMaintain flatness within 70 X 70 mm area ㆍVent hole Ø50 ㆍBolt hole Ø6.2, 2 places, P.C.D Ø79 |
|---|---|---|---|---|---|
| Material |
ㆍHOUSING : Aluminum ㆍDISC : Aluminum ㆍCAP : Stainless steel ㆍO-RING : Rubber (Silicone) ㆍMAGNET : Neodymium |
||||
| Durable Temperature | -40℃ ~ 220℃ | Continuous Operating Temperature | Max. 85℃ | Fastening Type |
ㆍBolt-fastening (M6), 2 places ㆍAssembly from outside of pack |
| Operating Pressure | 0.03 barg @ 22℃ | Reliability Test |
ㆍVibration test PASS ㆍSalt spray test PASS ㆍIP Code (IPX7 + IP69K) test PASS |
||
| Discharge Capacity | 45 L/s @ 0.1 bar, 22℃, air | ||||
| Dimensions | L124 X W68 X H8 | Weight | 105g (excluding fastener) | Installation Area |
ㆍMaintain flatness within 124 X 68 mm area with 4 corners R6 ㆍSurface roughness less than Ra 3.2 ㆍOne vent hole 90 X 31 mm ㆍBolt holes Ø6.2 or M6 X P1.0 Female, 4 positions, pitch 10.6 X 40 mm |
|---|---|---|---|---|---|
| Material |
ㆍHOUSING : Aluminum ㆍCAP & SEAL : Stainless steel + Fluoropolymer ㆍSPRING : Stainless steel ㆍGASKET : EPDM |
||||
| Durability Temperature | -40℃ ~ 220℃ | Continuous Operating Temperature | Max. 85℃ | Fastening Type |
ㆍBolt-fastening (M6), 4 positions ㆍAssembly from outside of pack |
| Burst Pressure | 0.2 barg @ 22℃ | Reliability Test | - | ||
| Discharge Capacity | 106 L/s @ 0.1 bar, 22℃, air | ||||
