Burst Sensor
Burst detection sensors
A burst sensor for a rupture disc that maintains a signal during normal operation while installed in an upper part of the rupture disc holder and shows signal loss on the separate monitoring equipment or the DCS system when the rupture disc ruptures due to the pressure exceeding the specified pressure within the tank or pipe, cutting the sensor film.
Sensor type |
Burst Sensor (Install on the upper part of the rupture disc holder to use) |
|---|---|
Operation |
Maintain Signal ON status → sensor film cut when rupture disc ruptures → Signal OFF |
Application |
Exceeding the specified pressure within the tank or pipe |
Output Function |
Signal recognition possible from separate monitoring device or DCS |
Features |
Depending on the Rupture Disc model, it is manufactured as an 'integrated' or 'separate' version. |
|
Electrical Specifications (Including 1.5m extension cable) |
Ui: 25.5 V Ii: 90 mA Pi: 0.63 W Ci: 0.01 nF Li: 1.66 μH |
A burst sensor integrated into a rupture disc that maintains a signal during normal operation while attached to a rupture disc and shows signal loss on the separate monitoring equipment or the DCS system when the rupture disc ruptures due to the pressure exceeding the specified pressure within the tank or pipe, cutting the sensor film.
Sensor type |
Burst Sensor (Rupture Disk Integrated) |
|---|---|
Operation |
Maintain Signal ON status → sensor film cut when rupture disc ruptures → Signal OFF |
Application |
Exceeding the specified pressure within the tank or pipe |
Output Function |
Signal recognition possible from separate monitoring device or DCS |
|
Electrical Specifications (Including 1.5m extension cable) |
Ui: 25.5 V Ii: 90 mA Pi: 0.63 W Ci: 0.01 nF Li: 1.66 μH |
A cable-type burst sensor integrated into a rupture disc that maintains a signal during normal operation while attached to a rupture disc and shows signal loss on the separate monitoring equipment or the DCS system when the rupture disc ruptures due to the pressure exceeding the specified pressure within the tank or pipe, cutting the specific break point in the cable.
Sensor type |
Cable-type Burst Sensor (Integrated with Rupture Disc) |
|---|---|
Operation |
Maintain Signal ON status → specific break point cut when rupture disc ruptures → Signal OFF |
Application |
Exceeding the specified pressure within the tank or pipe |
Output Function |
Signal recognition possible from separate monitoring device or DCS |
|
Electrical Specifications (Including 1.5m extension cable) |
Ui: 25.5 V Ii: 90 mA Pi: 0.63 W Ci: 0.02 nF Li: 1.24 μH |
